連接機器人 <Connect the Robot>
開啓AlphAI機器人 Turn on the AlphAI Robot
開啓機器人。
- 等待 大約1分30秒 直到它閃爍（見上方）。
Switch on the robot.
- Wait for about 1 minute 30 seconds until it blinks (see above).
Wi-Fi連接 Connection with WIFI
每個AlphAI機器人在底部都有一個獨特的ID編號。例如，下面的機器人的ID編號是571。
Each alphAI robot has a unique ID number written on its bottom. For example, the below robot is with ID number 571.
點擊位於PC右下角的PC連接圖標，。在開啟機器人後大約1分30秒，alphAI機器人將發出一個以其自身ID編號結尾的WIFI信號（見下圖）。
- 選擇WiFi ALPHAI-000nnn
- 需要輸入密碼。 密碼與WiFi名稱（ALPHAI-000nnn）相同。
Click the PC's connection icon at the bottom-right corner of the PC. After switch-ON for about 1 minute 30 seconds, the alphAI robot will send out a WIFI with a name ended with its own ID number (see below).
- Select the WiFi ALPHAI-000nnn
- A password is required. The password will be same as the WiFi name (ALPHAI-000nnn)
如果Wi-Fi連接成功，具有ID編號nnn的機器人將在PC上的AlphAI用戶界面上顯示（見下圖）。
If the WiFi is connected successfully, the robot with ID nnn will be shown on the AlphAI user interface on the PC (see below).
- 點擊它。
- 如果成功，您將進入AlphAI工作界面。
- 請注意，工作界面的右下角將顯示一個顯示電池電量的小圖標。 也會顯示 alphAI的ID（見下圖）。
- 如果未成功，請點擊故障排除按鈕，並按照<AlphAI連接常見問題指南>進行操作。
- Click on it.
- If successful, you will enter the AlphAI Working screen.
- Note that a small icon showing the battery level will be shown on the botton-right corner of the Working screen. The alphAI ID is also shown (see below).
- If not successful, chick the troubleshooting button and follow the <AlphAI 連接常見問題 guide>.
藍牙連接 Connection with Bluetooth
藍牙也可以用來進行連接。
在右上角點擊<藍牙低功耗>圖標，藍牙機器人圖標將出現。
Connection can also be done with Bluetooth.
Click on the Icon <Bluetooth Low Energy> on the Top-Right. The Bluetooth robot Icon will appear.
藍牙機器人圖標將出現。
點擊它，您將進入AlphAI工作界面。
The Bluetooth robot Icon will appear.
Click on it, you will enter the AlphAI Working Screen.